Every job starts with a walk of the cabin and a written scope. We spec the media, pressure, and stain system before any equipment comes off the trailer.

• —On-site walkthrough — moisture readings, finish-failure mapping
• —Mask windows, doors, gutters, HVAC, landscaping
• —Stage rig & containment per blast zone

Specialized low-impact blast media strips the logs back to fresh, bright wood. Hand-sanding or power-washing alone can't replicate this — they leave residue that wrecks adhesion.

• —Pressure & media tuned per log species & condition
• —Removes UV-gray fiber, mildew, lifting stain
• —Tough on coatings — gentle on the wood grain

Not every cabin needs it. Because we tune the blast carefully, most logs come off the rig already smooth — we only hand-sand the spots that genuinely need a touch-up before stain.

• —Knock down any raised wood "fuzz"
• —Feather around carvings, corners, chinking
• —Job-by-job — only where the wood calls for it

A premium log-home coating goes on bare, thirsty wood — that's when it bonds deepest. We work it into checked areas and end-grain, then seal the system.

• —Multi-coat application per manufacturer spec
• —Stain worked into checks & end-grain
• —Topcoat seals against UV, water & mold